SICE S 1000 Manual De Instrucciones página 180

5. Press the arrows to select the required infl ation
pressure.
The selected pressure value is displayed in red
6. Connect the infl ation hose to the valve stem (Fig. 51b).
INFLATION PROCEDURE:
7. Press the button
The wheel is infl ated automatically to the selected
pressure.
The pressure is not displayed until the entire
infl ation cycle is complete, and three horizontal
red bars are shown instead of the value (Fig. 51c).
Once infl ation is complete, the pressure is dis-
played again in green (Fig. 51d).
At this stage, infl ation has ended.
8. Disconnect the Doyfe infl ation fi tting from the
wheel.
9. Fit the inner core of the valve (Fig. 51a).
SPECIAL INFLATION PROCEDURE:
Use this function to improve tyre bead seating.
7A. Press the overinfl ate button
180
to start the cycle.
RISK OF EXPLOSION
Never exceed the pressure recommended by the
tyre manufacturer. Never mount tyres on rims with
a different diameter
An exploding tyre can cause personal injury or
death.
.
DANGER
User manual S 1000
51b
51c
51d