SICE S 1000 Manual De Instrucciones página 190

TROUBLESHOOTING
The TPMS does not respond
Sensor connector disconnected
- Connect the connector (see Fig. 55i)
The sensor assembled on the valve is broken
- Check TPMS operation with another sensor
faulty TPMS
- If the problem persists, contact the technical
assistance.
7. MAINTENANCE
When the machine is disconnected from the air supply, the devices
bearing the sign shown above may remain pressurised.
The "Spare parts" handbook does not authorise the user to perform any work on the
machine other than the operations described specifi cally in the User Manual, and must
only be used as reference to allow the user to provide the technical support service with
precise information to minimise service times.
Do not remove or change any part of the machine (except for maintenance purposes).
It is prohibited to perform any operation that changes the pre-established value of the
pressure regular valve or pressure limiter. The manufacturer declines all liability for
damage resulting from tampering with these valves.
Disconnect the machine from mains electricity and the compressed air supply and en-
sure that all moving parts are securely immobilised before making any adjustments or
performing any maintenance work.
190
DANGER
CAUTION!
CAUTION!
CAUTION!
CAUTION!
55i
User manual S 1000