SICE S 1000 Manual De Instrucciones página 141

5.2. PRELIMINARY CHECKS
Check that there is a pressure of at least 8 bar on the Filter Regulator pressure gauge.
If the pressure is lower than the minimum level, some movements such as the rotation
of the tool holder head may not function correctly
Check that the machine has been adequately connected to the power mains.
5.3. LOADING AND CLAMPING THE
WHEEL WITH THE LIFT S.L.
- Load the wheel onto the lifter.
- Press the pedal (Fig. 16a) until it reaches
the height of the turntable spindle (Fig. 16b).
- Place the wheel on the turntable spindle and lower
the lift by operating the pedal (Fig. 16c).
16a
UK
16b 16c
User manual S 1000 141