SICE S 1000 Manual De Instrucciones página 151

5.4c Mounting
For the mount operations, refer to paragraph 5.5d as the machine has no automatic
mounting procedure.
N.B.: if the
Phase 5, the Infl atron screen (optional) will appear
on the machine so that this tool can be used once
the mount operation has been completed (Fig 23).
5.5. MANUAL WORK PROCEDURE
5.5.a. Confi guration of wheel data
- From the main screen (Fig. 24), press the wheel
icon to select the wheel diameter quickly
from a list (see Fig. 24a)
Alternatively, from the main screen:
- Press
diameter in inches to set the required value.
- Press the small arrows
decrease the wheel diameter in tenths of an inch
to make any fi ne adjustments necessary.
5.5.b. Bead breaking
CAUTION!
KEEP YOUR HANDS
AND OTHER BODY
PARTS AWAY FROM
MOVING PARTS
User manual S 1000
button was pressed during
to increase or decrease the
to increase or
CAUTION!
KEEP FEET CLEAR
OF THE BEAD
BREAKER AND
LIFTER
23
24
24a
CAUTION!
DO NOT PER-
FORM BEAD
BREAKING IF
THERE IS AIR
IN THE TYRE
151
UK