SICE S 1000 Manual De Instrucciones página 176

UPDATE P3K
1. Insert the USB key with the updated software into the USB
port (Fig. 49) of the S 1000 and wait 10 seconds.
2. Select UPDATE P3K then press the confi rm button
(Fig. 49a).
The message shown in Fig. 49b is displayed.
- If the update does not start after 10 attempts, an error message is displayed (Fig. 49c).
Press the confi rm key
from point 1.
- If the update starts, a progress message on new fi le loading will be displayed (Fig. 49d).
- If fi le loading is interrupted, the message in Fig. 49e will be displayed.
3. After loading, the message in Fig. 49f will be displayed.
176
49a
to go back to the previous screen, then repeat the steps
49c
49e
49
49b
49d
49f
User manual S 1000