SICE S 1000 Manual De Instrucciones página 156

15 - Press the
16- Press the pedal
17-
Move the
position.
5.5.d. Mounting
Always check that the tyre/rim combination is correct in terms of compatibility (tube-
less tyre on tubeless rim; tube type tyre on tube type rim) and geometrical size (keying
diameter, cross-section width, off-set and shoulder profi le) before mounting.
Also check that rims are not deformed, that their fi xing holes have not become oval, that
they are not encrusted or rusty and that they do not have sharp burrs on the valve holes.
Make sure that the tyre is in good condition without any signs of undue wear or damage.
1- Carefully lubricate the sides of the tyre along
the entire circumference of the bottom and top
bead (Fig. 27a).
2- Manually adjust the tyre so that the upper
shoulder of the rim passes the lower bead and
goes into the well.
3- Press the
ing tool to the work position (Fig. 27b).
156
button to activate penetration of the bottom bead breaker disc.
to turn the turntable until the lower bead exits completely.
lever downwards to bring the lower bead breaker disc to the rest
CAUTION!
button to move the demount-
27a
User manual S 1000