Descargar Imprimir esta página

Dentsply Sirona SmartLite Pro EndoActivator Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
Keep dry
Keep away from sunlight
1 0 6
Atmospheric pressure limitation
k P a
8 6
k P a
Temperature limitation
35°C
95°F
-5°C
23°F
Non-sterile
Do not sterilize
xxx C °
Caution
Do not re-use
P
Plastic material
6.6 Electromagnetic Compatibility Precaution
This information is required by the 4th edition of IEC 60601-1-2.
• The SmartLite Pro® System needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided in this manual.
• Portable and mobile RF communications equipment can affect the SmartLite Pro® System.
• The use of accessories, transducers and cables other than those specified by Dentsply
Sirona, may result in increased emissions or decreased immunity of the
SmartLite Pro® System.
• The SmartLite Pro® System should not be used adjacent to or stacked with other equipment
and that if adjacent or stacked use is necessary, the SmartLite Pro® System should be
observed to verify normal operation in the configuration in which it will be used.
• Per IEC 60601-1-2, no additional environmental operating conditions are required for
normal use.
Guidance and manufacturer's declaration – electromagnetic emissions
The SmartLite Pro® System is intended for use in the electromagnetic environment specified below. The customer or the
user of the SmartLite Pro® System should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR11
RF emissions
CISPR11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
20
Compliance
Electromagnetic environment - guidance
The SmartLite Pro® System uses RF energy only for its internal function.
Group 1
Therefore, its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
Class B
The SmartLite Pro® System is suitable for use in all establishments, including
Class A -
domestic establishments and those directly connected to the public
Complies
low-voltage power supply network that supplies buildings used for
domestic purposes.
Complies

Publicidad

loading