Weber Legi-Air 2050 Traduccion De Las Instrucciones página 101

Chapter 5 Transport
Prerequisites

In the delivery state, the labeller will be packaged (deviations are possible),
meaning that:

it is positioned on a pallet

it is possibly wrapped with stretch film

it is secured with additional strapping bands
Required equipment

Suitable industrial transportation vehicles (forklifts, platform floor truck or double
pallet truck...) with sufficient load-bearing capacity (for weight specifications see
chapter "Technical specifications"). When using a forklift truck, you must drive
slowly during the transport.

1-2 persons, thereby the wearing of safety footwear is mandatory.

Stable sub-base for the labeller.

If necessary (Safety) steel scissors to remove the strapping
Pos.
1
2
3
4
a
b
Instruction
How to transport the labeller to its utilization site
Step
1
Version: 24.05.2016
Fig. 5-1: Legi-Air 2050 packaging example Legi-Air 2050 with U-arm
Designation
STRETCH FILM
PALLET
TRANSPORT STRAPPING
LEGI-AIR 2050
GRIPPING POSITION
GRIPPING POSITION
Approach
Transport the labeller to its utilization site (within a vicinity of approx. 3m).
The accurate positioning will be carried out during the course of the installa-
tion by Bluhm Weber Group technicians.
Page 31 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL