Notes Regarding The Operating Instructions Use - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 343
Chapter 1 General
The operating instructions must be accessible at all times at the utilization site of the sys-
tem, and must be read and observed accordingly by persons who are tasked with the per-
formance of work on the system.
Printing errors, mistakes and changes pursuant to the latest state-of-the-art are reserved.
For clarity reasons, illustrations can be shown without protective devices.

Notes regarding the operating instructions use

The following you will find a detailed explanation of the writing and representation styles
used in this Service Manual.
Buttons and switches that need to be actuated are enclosed in square brackets.
Example: Press the [start] button to apply the change ...
Operations that must be processed in a fixed sequence are numbered.
Step
1
Special information is written in bold or highlighted in grey.
This is an example of a special information!
All illustrations (Fig.) are numbered consecutively for each chapter. This means
that a reference to "Fig. 2-1" is equivalent to the 1. illustration in Chapter 2.
Illustrations are often reduced to show the essentials, and can therefore differ
from the original. The absence of covers or protective devices in illustrations is
therefore only performed to promote a better understanding.
To address a broad range of variants, it is possible that example or principle fig-
ures can strongly differ from the original or not apply at all.
Illustrations are sometimes confined to the depiction of a single version (e.g. only
RH or only LH...), especially when the information content can be appropriately
applied to other versions.
Version: 24.05.2016
Approach
Disconnect the mains plug...
Page 5 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL

Publicidad

Tabla de contenido
loading

Tabla de contenido