Print Data Management; Batch Operation (Batch Processing); On-Demand Operation (Individual Processing) - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Chapter 4 Description of the labeller

Print data management

Print data that is sent to the labeller must be provided in different ways, according to the
requirements:

Batch operation (batch processing)

Through this, a print job for a larger number of matching labels is transmitted to the print
module. All products will receive labels with identical print data.

On-demand operation (individual processing)

Synchronized with the product handling, the Legi-Air 2050 will receive the dataset for a
single label before the product arrives. The on-demand mode is used, if products contain
individual product data.
A wrongly transferred print job or dataset which should no longer be used after a failure,
can be deleted through a software command. However, this delete command must be
sent off via the data interface before the transmission of the subsequent job.
Version: 24.05.2016
Page 29 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL