Intended Use - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Chapter 2 Safety regulations

Intended use

The operational safety of the labeller is only guaranteed when used as intended.
An intended use shall be considered as such, if ...

the labeller is exclusively used for the automatic labelling of moving or stationary
products.

manual interventions are only made after the labeller has been stopped.

the labeller is used for the products agreed upon with the customer, and with the
accordingly agreed-upon labels. The products and labels must correspond to the
specifications *documented and agreed upon between the machine manufacturer
and the customer.
* "Documented specifications" are usually stated in the SAD (System Application Description), which are provided to
the customer together with the order confirmation.

the labeller is used in a non-explosive environment. (No EX protection suitabil-
ity!).

the labeller does not come into direct contact with food.

the labeller is not used for outdoor applications.

the labeller is used in a wet environment with an automatic
slide plate at the stamp outlet.

the labeller is operated with additional ventilation measures in the stainless steel
protective enclosure for use in aggressive air environments (e.g. salty air or simi-
lar).

the labeller is operated with additional ventilation measures in the protective en-
closure for the deployment in dusty environments with floating particles.

the labeller is only used in the industrial sector.

the working conditions and instructions prescribed these operating instructions
are complied with.

Faults on the labeller, which could affect the safety must be reported immediate-
ly, and also immediately eliminated by qualified and trained personnel.

the maintenance is carried out properly.

the labeller is only operated in a flawless state.

protective devices are not bypassed or deactivated.

arbitrary changes to the machine are not performed.

the labeller is only operated and handled by suitable personnel, see "Approved
persons" (see page 19). These people must have read and understood the oper-
ating instructions.
A handling of the labeller which fails to observe one of these points, is considered as im-
proper and can lead to serious property damage and personal injury.
Version: 24.05.2016
Page 13 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL