Information About Other Dimensions; Performance Data; Information About The Control Elements; Noise Level - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Chapter 3 Technical specifications

Information about other dimensions

DE
Maximum usable applica-
tion stroke length
Dispensing tamp
Label format
(label gap min. 3mm):
GB
Label rolls, outer diameter:

Performance data

Application cycle rate
Distance of application
(tamp to product)
Dispensing accuracy

Information about the control elements

Control Panel
Control Panel print module

Noise level

The measurements at a distance of 1 m from the machine surface and 1.60 m above the
floor, show following noise emissions:
A sound pressure level
C sound pressure level

Information on the printer

For details, please refer to the supplied printer manual.
Manufacturer
Sato
Version: 24.05.2016
160 mm (300 stroke)
max. 120 x 160 mm / min. 120 x 90 mm
(B x H):
(W x H)
max. 120 x 160 mm / min. 40 x 30 mm
Ø = 218 mm (corresp. to 200 running meters for 76 mm (3")
roll core
up to 15 labels/min
0-10 mm (depending on the size of the label)
+/- 1.5 mm at a distance of application below 50% of the
smallest label side
[START] and [RESET] buttons, potentiometer [TR1↑] and
(labeller)
[TR2↓], 4 DIP Switches.
For specification see accompanying manual
72
dB
80
dB
Type designation / print width / print resolution
CLN4X / 104 mm / 304dpi
Page 22 of 68
40037053 BTA Legi-Air 2050
(depending on the label size, stroke length...)
ML-GB