Operation; Operation Of The Labeller; Safety Notice; Labeller On/Off Switching - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Chapter 7 Operation
DE
7.

Operation of the labeller

Safety notice

GB
The Legi-Air 2050 is an automatic labelling system, which does not require any fur-
ther manual intervention after the labelling operation has started.

Labeller on/off switching

On switching
Off switching

Control Panel of the labeller

The control panel is located on the left next to the applicator. The enables the following
functions:
Version: 24.05.2016

Operation

Hazards from moving parts.
Catchment and crushing risk through pneumatically or electrical-
ly powered components of the labeller.
Movements or rotations start in the labelling operation suddenly
and abruptly.
̶ Do not reach into, towards or between moving parts.
Keep the power switch (see Fig. 4-1, page 24) pressed for more than
1 second.
Keep the power switch pressed for more than 2 seconds
Pos. Designation
1 [START[] BUTTON
2 [RESET[] BUTTON
3 STATUS LEDS
4 DIP-SWITCH WITH THE SWITCHES [SW1] TO [SW4]
TR1
TRIMMER POTENTIOMETER (POTI) TR1
TR2
TRIMMER POTENTIOMETER (POTI) TR2
RISK OF INJURY!
Page 52 of 68
40037053 BTA Legi-Air 2050
Fig. 7-1: Settings on the applicator
ML-GB