Weber Legi-Air 2050 Traduccion De Las Instrucciones página 481

Ersatzteildokumentation / Spare Part Catalog
(GB) Conventions Used in this Manual
This documentation (according to the standards DIN 24 420 Part 1/2) contains the
standard spare parts of the print-apply system Legi-Air 2050.
This documentation is valid for Right Hand and Left Hand variants. Respectively,
the illustrations can only be restricted to one of the two portrayal examples.
In this documentation, spare parts are first divided into assemblies. Spare parts of
assemblies are illustrated in detail with position numbers.
Each position number of an assembly will be assign exclusively only once for an item,
which guarantees for a clear and unique assignment. In some cases position numbers
can occur more than once.
This is followed by the corresponding parts
in the assessment for stocking up spare parts. This classification considers empirical
criteria as load, wear, but also the risk of damage spare parts are exposed to. In the
following see the overview of the levels:
Service-Level
Service-Level 1
Service-Level 2
Service-Level 3
Service-Level 4
Service-Level 5
Delivery times for Service Level x.1 parts
Service-Level 3 or Service-Level 4 with the extension „ .1" (e.g. Service-Level 4.1)
indicates that appropriate part is not available from stock. This means you have to expect
longer delivery time (> 2 weeks). Customers with demand a high operational availability,
we recommend to make your own stocking.
Used Abbreviations
mm
Pcs.
DIN/EN/ISO
Alu
Ordering Spare Parts
Spare parts can be identified only by using the part number. Always give the following
information around out-to avoid orders:

System name:

Position Number:

Description:

Spare Part-Number:

Quantity:

Number of spare list:
Version: 24.05.2016
Small maintenance kit (normally only for print engines) >> wear parts that are
replaced at each maintenance. Only for low-performance applications.
Large maintenance kit >> wear parts that are replaced at each maintenance.
Recommended spare parts >> repair and wear parts that are only replaced if
required.
Consignment stock >> parts are stored at the customer, for highest system
availability. Enables to arrange almost all repairs.
Spare parts that are damaged by
screws..), massive angles and mountings ...
Millimetre
Pieces
Different standards
Aluminium
Legi-Air 2050
120
One Way Flow Control
33080169
1
40036957
3 - 18
list. The column "Service-Level" will help you
non-intended use. E.g. standard
RH Right hand (system)
LH Left hand system
X (Y) Order Quantity = X of Y
40036957 ETD Legi-Air 2050
parts (Din-
ML-DE/GB