Connecting The Labeller - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 343
Chapter 6 Installation and initial commissioning
Positioning of the labeller
System mounting on a Bluhm Weber Group frame!
If the system is mounted onto a Bluhm Weber Group frame, then please follow the instal-
lation instructions of the supplied frame documentation.
Prerequisites
The labeller is unpacked and prepared (see chapter "Transport"), in the vicinity of
the labelling site.
Connections for compressed air and electricity in accordance with the Chapter
"Technical data", are installed in the vicinity of the labelling site (max 1.50 metres
away).
The base area is solid, horizontal and level.
Frame from the Bluhm Weber Group (option)
Required equipment
Spirit level
Instruction
How to install the labeller.
Step
1
2

Connecting the labeller

The labeller needs electrical power and compressed air to function properly. See the de-
tails in the Chapter "Technical specifications".
Version: 24.05.2016
Approach
Roll the labeller to the labelling site (where the label is to be dispensed onto
the product). Move the labeller incrementally without the rollers, by pushing
diagonally. Thereby, observe all points regarding the "Positioning of the la-
beller" on page 36.
Horizontally align the labeller with a spirit level, using the adjustable tripod
feet, U-arm and hinge adaptations. (With rollers the locking brakes must be
locked).
Page 37 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL

Publicidad

Tabla de contenido
loading

Tabla de contenido