Electrical Sonet/Dsn/Sdh/Pdh Interface Connection - EXFO FTB-8510B Guia Del Usuario

Electrical SONET/DSn/SDH/PDH Interface
Connection
2M-155M port: The FTB-8105/15/20/30 provides two BNC connectors,
labeled 2M-155M IN and OUT, for E1/2M, E2/8M, E3/34M, DS3/45M,
STS-1e/STM-0e/52M, E4/140M, STS-3e/STM-1e/155M testing capability.
Connector type is BNC for coaxial 75-ohm cable connection.
1.5M/2M Bantam port: The FTB-8105/15/20/30 provides an IN/OUT
Bantam connectors for DS1/1.5M and E1/2M testing capability.
1.5M/2M RJ-48C port: The FTB-8105/15/20/30 provides an IN/OUT
RJ-48C connectors for DS1/1.5M and E1/2M testing capability.
Note: Dual RX test case uses the BNC labelled AUX as the second RX port.
Connect the signal to be tested to the corresponding port.
SONET/SDH Application
Physical Interfaces and LEDs

Electrical SONET/DSn/SDH/PDH Interface Connection

21