Lcas - Source - EXFO FTB-8510B Guia Del Usuario

Next-Generation Tabs

LCAS - Source

LCAS - Source

Note: The test must be started and Enable LCAS has to be enabled from either
VCAT TX - Overview on page 459 or VCAT RX - Overview on page 463 in
order to access the LCAS Source functionality. Alternatively, LCAS
functionality can be enabled via the test setup, as the test case is being
mounted.
Press TEST and LCAS.
The LCAS Source tab gives access to the following tabs:
LCAS Source - LCAS Overview on page 469
LCAS Source - Alarm on page 471
LCAS Source - Error on page 473
LCAS Source - SQ/CTRL Control on page 475
LCAS Source - MST/RS-Ack Control on page 477
LCAS Source - Configuration on page 479
Note: The default selected tab is LCAS Overview.
Arrows
Single arrows move one position up or down in the list.
Double arrows move one page up or down in the list.
468
FTB-8100 Series Transport Blazer