Opu Rx - EXFO FTB-8510B Guia Del Usuario

OPU RX

Press TEST, ODUk, and OPU (under ODUk RX).
LO
Alarm Analysis
OPU-PLM (Payload Mismatch): OPU-PLM is declared when the
Payload Structure Identifier (PSI) field do not match the expected PT
for at least 3 consecutive frames. See Enable OPU-PLM on page 204.
OPU-MSIM (Multiplex Structure Identifier Mismatch): OPU-MSIM is an
HO alarm that is available for multiplexed test case only. OPU-MSIM is
declared when the RX Payload Structure Identifier (PSI) information do
not match the expected HO Multiplex Structure Identifier configuration
defined from the test case setup.
Enable OPU-MSIM allows enabling the OPU-MSIM alarm analysis.
SONET/SDH Application
HO
OTN Tabs
OPU RX
203