DS1/1.5M TX
Press TEST, DSn-PDH, and DS1 (under DSn-PDH TX).
Configuration
Framing: Select the framing that will be used for transmission. Choices are
Unframed, SF, and ESF. The default setting is ESF.
Alarm Generation
Type: Select the type of alarm to be generated. Choices are AIS, RAI,
and OOF. The default setting is AIS.
Note: Choices depend on the selected framing.
On/Off button: Press On/Off to enable/disable the alarm generation.
SONET/SDH Application
DSn Tabs
DS1/1.5M TX
275