EXFO FTB-8510B Guia Del Usuario página 1124

Next-Generation Tabs
LCAS - Source
Automated
474
Rate: Click on the Rate field to select the injection rate for the
automated error. Choices are from 1.0E-03 to 9.9E-01. The default
setting is 1.0E-02.
Continuous: When activated, generates a CRC error in all control
packets. This setting is disabled by default.
On/Off button: The On/Off button is used to activate/deactivate the
selected automated error at the rate specified or continuously
when continuous is enabled. This setting is disabled (Off) by
default.
FTB-8100 Series Transport Blazer