EXFO FTB-8510B Guia Del Usuario página 1018

SDH Tabs
LOP OH TX/RX (SDH, TU-3 path)
Path Overhead
Binary: Allows either displaying all overhead values in binary (when
enabled) or hexadecimal (when disabled). This setting is disabled by
default.
J1: Trace
B3: BIP-8. This byte is not programmable from the HOP OH TX tab.
C2: Path Signal Label
G1: Path Status
F2: User Channel
H4: Multiframe Indicator
F3: User Channel
K3: Automatic Protection Switching (APS)
N1: (Network Operator) Tandem Connection Monitoring (TCM)
368
FTB-8100 Series Transport Blazer