EXFO FTB-8510B Guia Del Usuario página 802

Port Tabs
Port RX (Optical Interfaces)
Frequency Analysis
The FTB-8100 Series allows the following frequency monitoring range.
OC-3/STM-1
OC-12/STM-4
OC-48/STM-16
OTU1
OC-192/STM-64
OTU2
OTU1e
OTU2e
OTU1f
OTU2f
OC-768/STM-256
OTU3
Actual Frequency (bps) indicates the frequency of the input signal in bps.
Frequency Offset indicates the offset between the standard rate
specification and the rate of the input signal.
Max. Negative Offset indicates the offset between the standard rate
specification and the smallest rate recorded from the received signal.
Max. Positive Offset indicates the offset between the standard rate
specification and the largest rate recorded from the received signal.
Offset Unit allows the selection of the frequency offset unit. Choices are
bps and ppm. The default setting is ppm.
152
Interface
155520000 ±100 ppm
622080000 ±100 ppm
2488320000 ±100 ppm
2666057143 ±100 ppm
9953280000 ± 100 ppm
10709225316 ±100 ppm
11049107143 ±120 ppm
11095727848 ±120 ppm
11270089286 ± 120 ppm
11317642405 ± 120 ppm
39813120000 ±100 ppm
43018413559 ±100 ppm
Measurement range
FTB-8100 Series Transport Blazer