EXFO FTB-8510B Guia Del Usuario página 714

Creating and Starting a Test Case
Introducing the Test Setup
The Test node is the root of the test case. It allows the configuration of
the test name, clock mode and test mode.
The Connector node allows the selection and configuration of the
physical port.
The Signal node allows the selection and configuration of the signal.
Additional signal nodes are created for each step of the mapped signal
level.
The Payload/Traffic node completes the test path by selecting the
pattern or an external traffic such as Ethernet interface with Packet
Blazer.
64
FTB-8100 Series Transport Blazer