EXFO FTB-8510B Guia Del Usuario página 1125

LCAS Source - SQ/CTRL Control
Press TEST, LCAS and SQ/CTRL Control (under LCAS Source).
Note: Not available in Through mode.
Member indicates the timeslot number.
SQ
SQ (Sequence Indicator): Indicates the member sequence indicator.
The SQ for members in IDLE state will be automatically set to 63 for
LOP or 255 for HOP .
Overwrite Enable: Allows overwriting the SQ number. The SQ number
of each member having the Overwrite Enable checked can be
overwritten. Click on a specific member's SQ number and enter the
new number. Possible values are from 0 to 63 for LOP and from 0 to
255 for HOP . The number(s) changed will only take effect when the
Apply Overwrite Value(s) button is pressed.
Generated: The SQ value generated by the state machine.
Enable All: Allows enabling the SQ overwrite for all members.
SONET/SDH Application
Next-Generation Tabs
LCAS - Source
475