EXFO FTB-8510B Guia Del Usuario página 1045

Source MAC Address: A default and unique Source Media Access
Control (MAC) address of the module is automatically given to the
stream. Press the Source MAC address field if the stream MAC address
has to be changed and enter the new MAC address.
Destination MAC Address: Enter the destination MAC address of the
stream. The default setting is FE:FE:FE:FE:FE:FE.
VLAN: When enabled, allows the configuration of VLAN. This setting is
disabled by default.
Note: Enabling/disabling VLAN will affect the Frame Size value.
SONET/SDH Application
ID: Enter the VLAN ID. Choices are 0 through 4095. The value 4095
is reserved while 0 and 1 have specific utility; refer to VLAN on
page 646 for more information.
Binary: When selected, allows entering the VLAN ID in binary.
The Binary check box is cleared by default.
Type: Indicates the supported VLAN Ethernet Type (8100).
Priority: Select the VLAN user priority. Choices are 0 to 7; refer to
VLAN on page 646 for more information. The default setting is 0
(000 - Low Priority).
Ethernet Tabs
Configuration
395