Vcat Tx - Diff Delay - EXFO FTB-8510B Guia Del Usuario

VCAT TX - Diff Delay

Press TEST, VCAT, and Diff Delay (under VCAT TX).
Group Members
Member indicates the timeslot number.
SQ (Sequence Indicator): Indicates the member sequence indicator.
Absolute Delay: Enter the absolute delay for each required member.
Choices are from 0 to 256000 μs configurable in steps of 125 μs for
HOP and 500 μs for LOP except for TU-3 which is configurable in steps
of 125 μs, meaning that the value will be rounded to the closest
multiple of 125 (HOP) or 500 (LOP).
Differential Delay: Indicates the differential delay value for each
member according to the absolute delay values entered for members.
The graphical representation shows the differential positive and
negative delays for each member. A delay value bar at the left side of
the vertical line represents a negative delay while the one on the right
side represents a positive delay. A member having a negative delay
compare to another one having a positive delay indicates that this
member is faster than the other one. The differential delay is
calculated from the reference member.
Enable Delay: Allows enabling the absolute delay for each member.
Arrows: Single arrows move one position up or down in the list.
Double arrows move one page up or down in the list.
SONET/SDH Application
Next-Generation Tabs

VCAT TX - Diff Delay

461