EXFO FTB-8510B Guia Del Usuario página 1070

Advanced Tabs
Service Disruption Time (SDT) - Monitor
Analysis Tab
Port: Available with OC-n, STM-n, and OTU1/OTU2/OTU3 signal levels.
Refer to Port RX (Optical Interfaces) on page 150 for more information.
Errors/Alarms:
Section/Line
STS-1 Channel
RS/MS
AU-4 Channel
OTU
ODU1/ODU2/ODU3 ODU RX on page 189
ODU0 Channel
SDT Analysis: Available for each channel, indicates the pass/fail
verdict and the longest measured disruption time when enabled (see
SDT Threshold on page 419).
Path Signal Label (C2): Available for each high order path channel,
indicates the received Path Signal Label. Refer to Path Signal Label
(C2) on page 256 for more information.
Payload Type PSI[0]: Available for each ODU channel, indicates the
received payload type. Refer to OPU RX on page 203 for more
information.
420
Section RX (SONET) on page 219
Line RX (SONET) on page 228
HOP RX (SONET) on page 251
Regenerator Section RX (SDH) on page 311
Multiplex Section RX (SDH) on page 320
HOP RX (SDH) on page 341
OTU RX on page 163
ODU RX on page 189
OPU RX on page 203
GMP RX on page 209
Refer to
FTB-8100 Series Transport Blazer