SDH Tabs
Multiplex Section OH TX/RX (SDH)
Multiplex Section OH TX/RX (SDH)
The Multiplex Section OH TX allows changing the multiplex transport
overhead information to be transmitted while the Multiplex Section OH
RX allows verification of the multiplex transport overhead information
received.
Press TEST, RS-MS, and MS OH (under RS-MS TX/RX).
Multiplex Section Overhead
STM-1 Channel: Select the timeslot number that will be used for the
test. Choices are 1 for STM-1, 1 to 4 for STM-4, 1 to 16 for STM-16, 1 to
64 for STM-64, and 1 to 256 for STM-256. The default setting is 1.
326
FTB-8100 Series Transport Blazer