EXFO FTB-8510B Guia Del Usuario página 749

4. TCM Configuration:
4a. Select ODU TCM (TCM1 to TCM6) layers as
4b. Press Next or Finish.
5. Select the test Path/Mapping:
5a. From the data path selector, select the desired
5b. For ODU2, select ODU TCM (TCM1 to TCM6)
SONET/SDH Application
required
path/ mapping. See Supported Paths/Mappings on page 59 for
more information.
layers as required.
Select a group of four OPU3 tributary slots.
Choices are 1 to 16:
When the Fixed Structure check box is
selected, the selection of a tributary slot will
automatically select four tributary slots (from
the same column) which constitute the
foreground traffic. Choices are (1,5,9,13), (2, 6,
10, 14), (3, 7, 11,15), and (4, 8, 13, 16). Note that
the Tributary Port number is automatically assigned.
When the Fixed Structure check box is cleared, select the four
tributary slots individually, and select the Tributary Port number
(1, 2, 3, or 4) that will be associated to the selected tributary slots.
Creating and Starting a Test Case
Typical Test Cases
99