Publicidad
All manuals and user guides at all-guides.com
ENGINE OIL REPLACEMENT
3 - 16
6. Idle the engine more than 10 seconds
while keeping the motorcycle upright.
Then stop the engine and add the oil to
the maximum level.
7. Install:
Oil tank cap
G
ENGINE OIL REPLACEMENT
1. Start the engine and let it warm up for
several minutes.
2. Stop the engine and place an oil pan
under the drain bolt.
3. Remove:
Oil tank plug 1
G
Oil filler cap 2
G
Drain bolt (with gasket) 3
G
Oil filter drain bolt (O-ring) 4
G
Drain bolt (with gasket) 5
G
Drain bolt (with gasket) 6
G
Drain the crankcase and oil tank
(frame) of its oil.
4. Remove:
Engine skid plate
G
Engine oil hose clamp 1
G
Bolt (engine oil hose) 2
G
Engine oil hose 3
G
Oil strainer (frame) 4
G
5. Clean:
Oil strainer (frame)
G
INSP
ADJ
Publicidad
Capítulos
