Publicidad
LIGHTING SYSTEM
INSPECTION STEPS
Refer to the following flow chart when inspecting the ignition system for possible problems.
Check the bulb and bulb
socket.
OK
Check the AC magneto.
OK
Check the entire lighting sys-
tem proper for connections.
OK
Check the rectifier/regulator.
NOTE:
Replace the bulb and/or bulb socket.
G
1) Seat
2) Fuel tank
Use the following special tool.
G
Pocket tester:
YU-3112-C/90890-03112
All manuals and user guides at all-guides.com
No good
Lighting coil
Improperly connected
Out-put
voltage
6 - 24
LIGHTING SYSTEM
No good
No good
–
+
ELEC
Replace the bulb and/
or bulb socket.
Replace.
Repair or replace.
Replace.
Publicidad
Capítulos
