Yamaha WR450F 2003 Manual De Servicio Del Propietario página 39

YM-01442, 90890-01442

This tool is used when install the fork oil seal.

This tool is used for when loosening or tightening the

flywheel magneto securing nut.

Yamaha pocket tester

Use this tool to inspect the coil resistance, output

voltage and amperage.

YM-33277-A, 90890-03141 Timing light

This tool is necessary for checking ignition timing.

Valve spring compressor

This tool is needed to remove and install the valve

This tool is used to hold the clutch when removing or

installing the clutch boss securing nut.

Intake 4.5 mm (0.18 in)

Exhaust 5.0 mm (0.20 in)

This tool is needed to remove and install the valve

This tool is needed to install the valve guide.

Intake 4.5 mm (0.18 in)

Exhaust 5.0 mm (0.20 in)

This tool is needed to rebore the new valve guide.

All manuals and user guides at all-guides.com

Tool name/How to use

SPECIAL TOOLS

Illustration

Capítulos