Starting A Warm Engine - Yamaha WR450F 2003 Manual De Servicio Del Propietario

All manuals and user guides at all-guides.com

STARTING AND BREAK-IN

STARTING A WARM ENGINE

Do not operate the cold starter knob and throt-

tle. Pull the hot starter lever 1 and start the

engine by pushing the start switch or by kick-

ing the kickstarter forcefully with a firm stroke.

As soon as the engine starts, release the hot

starter lever to close the air passage.

Restarting an engine after a fall

Pull the hot starter lever and start the engine.

As soon as the engine starts, release the hot

starter lever to close the air passage.

The engine fails to start

Pull the hot starter lever all the way out and

while holding the lever, kick the kickstarter 10

to 20 times to clear the engine.

Then, restart the engine.

Refer to "Restarting an engine after a fall".

Air temperature = less than

5 ˚C (41 ˚F)

Air temperature = more

than 5 ˚C (41 ˚F)

Air temperature (normal tem-

perature) = between 5 ˚C

(41 ˚F) and 25 ˚C (77 ˚F)

Air temperature = more

than 25 ˚C (77 ˚F)

Starting an engine after a long

period of time

Restarting a warm engine

Restarting an engine after a fall

* Operate the throttle grip before kick starting.

Observe the following break-in procedures

during initial operation to ensure optimum

performance and avoid engine damage.