Publicidad
All manuals and user guides at all-guides.com
2
3
1
9
4
M
0
7
ELECTRIC STARTING SYSTEM
ELECTRIC STARTING SYSTEM
STARTING CIRCUIT CUT-OFF SYSTEM
OPERATION
If the main switch is set to "ON", the starter
motor can only operate if at least one of the
following conditions is met:
The transmission is in neutral (the neutral
G
switch is closed).
The clutch lever is pulled to the handlebar
G
(the clutch switch is closed).
The starting circuit cut-off relay prevents the
starter motor from operating when neither of
these conditions has been met. In this
instance, the starting circuit cut-off relay is
open so current cannot reach the starter
motor. When at least one of the above condi-
tions has been met the starting circuit cut-off
relay is closed and the engine can be started
by pressing the start switch.
5
6
1 Battery
2 Main fuse
3 Main switch
4 Starting circuit cut-off relay
5 Start switch
6 Diode
7 Clutch switch
8
8 Neutral switch
9 Starter relay
0 Starter motor
6 - 7
ELEC
WHEN THE TRANSMISSION IS
IN NEUTRAL
WHEN THE CLUTCH LEVER IS
PULLED TO THE HANDLEBAR
–
+
Publicidad
Capítulos
