Publicidad
All manuals and user guides at all-guides.com
5 - 51
STEERING
9. Install:
Steering shaft cap 1
G
10. After tightening the nut, check the steer-
ing for smooth movement. If not, adjust
the steering by loosening the ring nut little
by little.
11. Adjust:
Front fork top end a
G
Front fork top end (standard) a:
Zero mm (Zero in)
12. Tighten:
Pinch bolt (handle crown) 1
G
23 Nm (2.3 m · kg, 17 ft · lb)
Pinch bolt (under bracket) 2
G
20 Nm (2.0 m · kg, 14 ft · lb)
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
13. Install:
Trip meter 1
G
Bolt (trip meter) 2
G
7 Nm (0.7 m · kg, 5.1 ft · lb)
NOTE:
Install the trip meter over the coupler bracket
3.
CHAS
Publicidad
Capítulos
