Assembly And Installation - Yamaha WR450F 2003 Manual De Servicio Del Propietario

All manuals and user guides at all-guides.com
4 - 87
ENGINE REMOVAL
EC4M5000

ASSEMBLY AND INSTALLATION

Engine installation
1. Install:
Engine 1
G
Install the engine from right side.
Pivot shaft 2
G
85 Nm (8.5 m · kg, 61 ft · lb)
Engine mounting bolt (lower) 3
G
69 Nm (6.9 m · kg, 50 ft · lb)
Engine lower bracket 4
G
Bolt (engine lower bracket) 5
G
34 Nm (3.4 m · kg, 24 ft · lb)
Engine mounting bolt (front) 6
G
69 Nm (6.9 m · kg, 50 ft · lb)
Engine upper bracket (right) 7
G
Engine upper bracket (left) 8
G
Bolt (engine upper bracket) 9
G
55 Nm (5.5 m · kg, 40 ft · lb)
Engine mounting bolt (upper) 0
G
52 Nm (5.2 m · kg, 37 ft · lb)
Bolt (engine guard) A
G
23 Nm (2.3 m · kg, 17 ft · lb)
Engine skid plate (front) B
G
Bolt (engine skid plate) C
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Apply the molybdenum disulfide grease on the
pivot shaft.
EC4M5211
Brake pedal
1. Install:
Spring
G
Brake pedal 1
G
O-ring 2 New
G
Bolt (brake pedal) 3
G
26 Nm (2.6 m · kg, 19 ft · lb)
Clip 4
G
NOTE:
Apply the lithium soap base grease on the
G
bolt, O-rings and brake pedal bracket.
Install the clip with its stopper portion a fac-
G
ing inward.
ENG