Publicidad
All manuals and user guides at all-guides.com
2
FUSE INSPECTION
6. Install:
Battery
G
Battery band
G
7. Connect:
Battery leads
G
(to the battery terminals)
CAUTION:
First, connect the positive lead 1, then the
negative lead 2.
8. Check:
Battery terminals
G
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
9. Lubricate:
Battery terminal
G
10. Install:
Seat
G
EAS00181
FUSE INSPECTION
CAUTION:
To avoid a short circuit, always set the
main switch to "OFF" when checking or
replacing a fuse.
1. Remove:
Seat
G
Fuse cover
G
2. Check:
Continuity
G
1
Checking steps:
Remove the fuse 1.
G
Connect the pocket tester to the fuse and
G
check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1".
If the pocket tester indicates "∞", replace
G
the fuse.
2 Reserve fuse
3 - 56
INSP
ADJ
Recommended lubricant
Lithium soap base grease
Pocket tester
YU-3112-C/90890-03112
Publicidad
Capítulos
