Descargar Imprimir esta página

APRILIA 960X Manual De Taller página 162

Publicidad

0,!#!3 $% 3/0/24% -/4/2
$%3-/.4!*%
Lea con cuidado pág. 4 (NORMAS GENERALES DE
SEGURIDAD).
Desmonte el caballete central, véase pág. 159 (CABA-
LLETE CENTRAL - DESMONTAJE).
Destornille y quite la tuerca especial (1) de enganche
muelle y guarde la arandela elástica (2).
Par de apriete tuerca (1): 25 Nm (2,5 kgm).
Afloje la contratuerca (3).
Par de apriete contratuerca (3): 25 Nm (2,5 kgm).
Afloje el regulador (4).
Extraiga el tornillo (5) y guarde la arandela elástica (6)
y el grupo de ajuste completo (7).
IMPORTANTE
Prepare un soporte (8) a introducir
por debajo de la parte trasera del vehículo, para sostener-
lo cuando está desprovisto de las placas de soporte mo-
tor.
Destornille y quite la tuerca (9).
Par de apriete tuerca (9): 25 Nm (2,5 kgm).
Extraiga el tornillo (10) y guarde la arandela (11) y la
arandela elástica (12).
IMPORTANTE
En el lado derecho del vehículo la
arandela (11) no está presente.
Destornille y quite la tuerca (13).
Par de apriete tuerca (13): 25 Nm (2,5 kgm).
Extraiga el tornillo (14).
Guarde las dos placas (15) y (16) de soporte motor.
%.').% 3500/24 0,!4%3
2%-/6!,
Carefully read p. 7 (GENERAL SAFETY RULES).
Remove the centre stand, see p. 159 (CENTRE
STAND - REMOVAL).
Unscrew and remove the special nut (1) for the cou-
pling of the springs and take the elastic washer (2).
Nut (1) driving torque: 25 Nm (2,5 kgm).
Loosen the lock nut (3).
Lock nut (3) driving torque: 25 Nm (2,5 kgm).
Loosen the adjuster (4).
Withdraw the screw (5) taking the elastic washer (6)
and the whole adjusting unit (7).
NOTE
Prepare a support (8) to be introduced under the
rear part of the vehicle, in order to hold it up when the en-
gine support plates are removed.
Unscrew and remove the nut (9).
Nut (9) driving torque: 25 Nm (2.5 kgm).
Withdraw the screw (10), taking the washer (11) and
the elastic washer (12).
NOTE
There is no washer (11) on the right side of the
vehicle.
Unscrew and remove the nut (13).
Nut (13) driving torque: 25 Nm (2.5 kgm).
Withdraw the screw (14).
Take the two engine support plates (15) and (16).
161
Area 51

Publicidad

loading

Este manual también es adecuado para:

8140167