WEG CLIC-02 Manual Del Usuario página 101

7.4.7 Output Function PLSY
The PLSY function is available only in models with transistor output. Only the fast output
Q01 can be used with function PLSY through function P01. Function PLSY will create a
number of pulses in the output in a programmed frequency. The time turned on in the output
will be half the period of the output waveform. The maximum output frequency is 1 KHz.

①

②

③
On CLIC-02 display or in the programming tool, the PWM block will be displayed this way:
Symbol
Function number: P01

Mode: 2

Output frequency: 1 ~ 1000 Hz

Number of output pulses: 0 ~ 32767
 
④
②


 ④③
- English -
Ladder Logic Programming
Description

①
CLIC-02 | 101