WEG CLIC-02 Manual Del Usuario página 105

7.4.9 SHIFT Function
The Shift function will move the programmed bits when there is a rising pulse in the selected
pulse variable. Up to consecutive 8 bits can be controlled, seeing that the displacement
will always be from the less significant to the most significant bit of the sequence. Only
one Shift function can be set in the program. The configuration parameters are described
below:

①

②
On the CLIC-02 display, or in the programming tool, the Shift function will be shown as
follows:
Symbol
Shift function number: S01

Displacement pulse

Number of variables controlled from

variable selected in 

Output variable


③
③ ④



②
- English -
Ladder Logic Programming
Description

①
CLIC-02 | 105