WEG CLIC-02 Manual Del Usuario página 153

Software example:
1. Create the Ladder program shown below, enabling the Datalink network, and download
it on the CLIC-02 with ID=1;
2. On CLIC-02 with ID=1, adjust the L01 function as shown below:
3. Download the same software for CLIC-02 with ID=0, but change the function L01 as
show below.
4. Run the program. Linking the CLIC-02 I01 with ID=1, M01~M04 will be in the status ON.
5. Monitor CLIC-02 with ID=0. M01~M04 of the ID=1 will be written for the network, being
read by the ID=0 and transferred directly to the outputs Q01~Q04. Any other network
ID that reads the range W09~W12 will read the status of M01~M04 on the ID=1.
For further programming information of the function L, see the item 7.4.8.
Port RS-485 Communication Functions
- English -
CLIC-02 | 153