WEG CLIC-02 Manual Del Usuario página 112

Ladder Logic Programming
Operating diagram
Habilitação
Enabling
Seleção
Selection
St
St
Maximum
Nível Máximo
level
Level 2 Nível 2
Nível 1
Level 1
StSp + Offset
StSp + Offset
Offset
Offset
When enabled, the AR function will maintain its output level in "StSp + Offset" for 100ms.
After this period, the output value will be incremented every 100ms, in accordance with the
increment rate up to the selected set-point level. When the stop input is actuated, the ramp
will seek the level "StSp + Offset", remaining in this status for 100ms. After this period, the
ramp output will be reset. It will be required to disable and enable the AR function again
to return to the selected level.
112 | CLIC-02
100 ms
100 ms
- English -
100 ms 100 ms
100 ms 100 ms