WEG CLIC-02 Manual Del Usuario página 53

Programming Tool
5.5.10 AQ Adjustment ...
The AQ Adjustment may be accessed by the Edit>>Adjustment AQ... menu. Through this
pop-up, we can configure the analog outputs associating a variable and setting the output
operation mode. An existing function or a constant can be associated to the output. The
AQ variation range is from 0 ~ 1000 units for the voltage mode and from 0 ~ 500 units for
the current mode. For further information on analog output modes, see Chapter 4: Ladder
Programming > AQ Function
5.5.11 Data Recorder Adjustment...
The DR data recorder contents can be defined as "Unsigned" or "Signed", being adjusted
through the pop-up shown below. By selecting "Unsigned" the range of values for DRs varies
from 0 to 65535. By selecting "Signed" the range of values varies from -32768 to32767.
CLIC-02 | 53
- English -