Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9.4.1.2 Inductive load
There will be a peak voltage (KV) when the inductive load changes from on to off, especially
in the relay model. There are different methods that can be used for the absorption of the
peak voltage, as follows:
a. Voltage VAC, absorption
Please do not use capacitance to absorption alone, as shown below:.
9.4.1.3 Relay Life
Life expectancy
The data shown above are a standard basis. The relay useful life is influenced by the
„
operating environment temperature.
The relay useful life is nearly 100,000 switches if the current is lower than 2A.
„
CR
100
10
1
0
1
2
3
4
Corrente (A)
- English -
b. Voltage VDC, freewheel diode
LMH type, 250VAC Res.
5
6
7
8
9
10
Hardware Specification
CLIC-02 | 145
Publicidad
Capítulos
Tabla de contenido
