WEG CLIC-02 Manual Del Usuario página 50

Programming Tool
50 | CLIC-02
1) Press "SEL" to activate the field selection
2) Press "↑", "↓", "←", "→" to move the cursor
3) Press "SEL" again to select the Field to edit
4) Press "↑", "↓" to change the number and press "←", "→"
to move the cursor
5) Press "OK" to confirm the changed value
Press "←" (Z02) to disable the opening of screen H03 and
the LCD Display will change to Initial Screen.
Press "↓" to restart the counting on the Timers (T01, T02,
T03), as developed in the program.
- English -