WEG CLIC-02 Manual Del Usuario página 22

Quick Programming Guide
4. The programming software will start detecting the connected CLIC-02 to complete the
connection.
3.5 CREATING A SIMPLE PROGRAM
1. We are going to create a program line. First, insert a contact by clicking the "M" icon
that is on the Ladder bar, as shown below. Then, click the leftmost cell in line 001.
Select M01 and press OK. See Chapter 7: Programming in Ladder Logic for complete
definitions of the instruction set.
Note: If the Ladder bar is not visible on the bottom of the screen, select the View>> Ladder
Toolbar menu.
22 | CLIC-02 - English -