WEG CLIC-02 Manual Del Usuario página 25

5. Select the icon "Run" on the toolbar and select "No" when pop-up prompts "Read the
PLC program?", as shown below.
6. On the toolbox of the input status, click M01 to activate the contact M01 which will TURN
ON the output Q01, as shown below. The highlighted circuit will show active and the
first output (Q01) on the CLIC-02 connected will be ON. See Chapter 5: Programming
Tool for more detailed information on the software.
- English -
Quick Programming Guide
CLIC-02 25