Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.4.10 AS Function – Addition/Subtraction
The AS function executes the addition and subtraction operations, using whole numbers.
CLICK- 02 has 31 AS instructions, seeing that each instruction uses 5 parameters for
configuration. The table below describes these parameters:
①
②
On the CLIC-02 display, or in the programming tool, the AS function will be shown as follows:
The formula used will be the following:
The variable ASxx will contain the result of the processed formula, where xx is the
number of the used AS function. The error output will be turned on when the operation
result generates a value outside the supported range, from -32768 ~ 32767. The output
will be turned off automatically when the result is correct or the AS function is disabled.
⑤
Symbol
Function number: AS01 ~ AS1F
Input parameter V1
Input parameter V2
Input parameter V3
Saída de Erro
(1) The Set-Points can be constant or current values of
any other function.
④
②
④③
AS = V1 + V2 - V3
- English -
Ladder Logic Programming
Description
: -32768 ~ 32767
(1)
: -32768 ~ 32767
(1)
: -32768 ~ 32767
(1)
①
CLIC-02 | 107
Publicidad
Capítulos
Tabla de contenido
