WEG CLIC-02 Manual Del Usuario página 13

1.4 INSPECTION BEFORE INSTALLATION
Every CLIC-02 has been completely tested and examined after its manufacturing. Please
perform the following inspection procedures when receiving your CLIC-02.
Check if the CLIC-02 model received is really the model ordered.
„
Check if any damage has occurred to CLIC-02 during transportation. Do not connect
„
CLIC-02 to the power supply if there is any sign of damage.
Please contact the vendor if any abnormal condition is observed, as mentioned above.
1.5 PRECAUTIONS FOR THE INSTALLATION ENVIRONMENT
It is important to observe the location of CLIC-02 because it is directly related to the
functionality and useful life of your CLIC-02. Please choose the installation location carefully
so that the following requirements are met:
Mount the unit vertically.
„
Ambient temperature: -20 to 55°C (-4 to 131°F).
„
Avoid installing CLIC-02 next to equipment or surfaces which dissipate heat.
„
Avoid installation in humid environment.
„
Avoid direct exposure to sunlight.
„
Avoid oil, grease and gas.
„
Avoid contact with corrosive gases and liquids.
„
Avoid contact with external dust or metal scrap.
„
Avoid installation in places with high electromagnetic interference (EMI).
„
Avoid excessive vibration; if vibration cannot be avoided, a device for anti-vibration
„
mounting should be installed to reduce vibration.
- English -
Safety Instructions
CLIC-02 | 13