WEG CLIC-02 Manual Del Usuario página 207

Function Block:
FBD:
13.4 FACTORY GATE CONTROL
13.4.1 Requirements
The main purpose of a factory gate is to control the access of trucks, which is operated
manually by the guard.
The porthole controls the opening and closing of the gate.
„
The stop button (emergency) can be activated at any time, disregarding the gate position.
„
The alarm is active for 5 minutes before the gate starts moving.
„
A pressure sensor is installed at the gate. At any instant that the sensor actuates, the
„
gate closing operation is stopped.
Alarm
Pressurized Switch
- English -
Application Examples
CLIC-02 | 207